This T.C.T two wing slotting cutter is ideal for biscuit jointing sizes
No. 0 - 45mm x 15mm x 4mm
Suitable for 8-12mm boards
Use bearing B19A 9.05mm depth
No. 10 - 53mm x 19mm x 4mm
Suitable for 13-18mm boards
Use bearing B16A 10.6mm depth
No. 20 - 58mm x 23mm x 4mm
Suitable for 19mm + board
Use bearing B127A
The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly
Supplied with instructions.
Shank = 1/2in